Humidistat Control
Complete Environmental Control If your humidity requirement is 85% or under,
the Humidistat Control offers the best overall control of your
environment. When the humidity drops to about 7% below the set
point, the Humidistat will activate the Aquafog to replenish the
loss of humidity. If mild or strong ventilation begins, humidity
can still be maintained with the added benefit of evaporative
cooling.
Capable of operating up to two 1 HP units.
Part Number
Electrical Rating
Price
H2-120
115Volt 60/50Hz
$349
H2-240
230Volt 60/50Hz
$356
H2-240-3
208-230Volt 60/50Hz 3 Phase
$373
24-Hour Timer Control
Excellent For Controlling Long Cycle Operations Often the choice for applications when the desired
humidity is above the 85% mark. Using extended cycle operations,
the operator can achieve accurate control of the humidity level
by manually adjusting the fluid metering valve of the Aquafog
unit. Raintight housing protects a nearly all plastic inner construction.
Adjustable to cycles as short as 1/2 hour. Four sets of on/off
trippers provided.
Capable of operating up to two 1 HP units.
Part Number
Electrical Rating
Price
TC-120
115Volt 60Hz
$343
TC-240
230Volt 60Hz
$351
PT-1
Trippers / 1 pair
$4
Thermostat Control
All The Control You Need If Your Main Interest Is Cooling These thermostats will provide accurate measurement of
the temperature, automatically controlling your Aquafog unit(s)
at approximately 3°F above and below your desired set point. Control
units are assembled with high quality waterproof components.
TH1 Control - Capable of operating single Aquafog units
up to 1 HP.
TH2 Control - Capable of operating up to two 1 HP units.
Part Number
Electrical Rating
Price
TH1-120
115Volt 60/50Hz
$214
TH1-240
240V 50/60Hz
$239
TH2-120
115Volt 60/50Hz
$339
TH2-240-3
208/230V 3phase
$327
TH2-240
230Volt 60/50Hz
$351
Two-Stage Control
Environmental Control For High Humidity Applications And Changing
Temperature Conditions Designed with the propagator in mind, these two-stage
systems will automatically adjust the amount of fog output. When
the time clock starts the operation of the Aquafog unit(s), the
timer will also open the first stage water solenoid, providing
low fogging output in low temerature conditions (conditions where
ventilation is at a minimum). When the temperature rises and more
rapid ventilation begins, the thermostat opens the second stage
water solenoid, providing the higher fogging output necessary
to replenish the loss of humidity. Features a 24-hour raintight
time clock, adjustable to cycles as short as 1/2 hour. Fours sets
of on/off trippers provided. Watertight solenoids, thermostat
and all brass plumbing construction.
If your humidity requirement is 85% or under,
the Humidistat Control offers the best overall control of your
environment. When the humidity drops to about 7% below the set
point, the Humidistat will activate the Aquafog to replenish the
loss of humidity. If mild or strong ventilation begins, humidity
can still be maintained with the added benefit of evaporative
cooling.
Often the choice for applications when the desired
humidity is above the 85% mark. Using extended cycle operations,
the operator can achieve accurate control of the humidity level
by manually adjusting the fluid metering valve of the Aquafog
unit. Raintight housing protects a nearly all plastic inner construction.
Adjustable to cycles as short as 1/2 hour. Four sets of on/off
trippers provided.
These thermostats will provide accurate measurement of
the temperature, automatically controlling your Aquafog unit(s)
at approximately 3°F above and below your desired set point. Control
units are assembled with high quality waterproof components.
Designed with the propagator in mind, these two-stage
systems will automatically adjust the amount of fog output. When
the time clock starts the operation of the Aquafog unit(s), the
timer will also open the first stage water solenoid, providing
low fogging output in low temerature conditions (conditions where
ventilation is at a minimum). When the temperature rises and more
rapid ventilation begins, the thermostat opens the second stage
water solenoid, providing the higher fogging output necessary
to replenish the loss of humidity. Features a 24-hour raintight
time clock, adjustable to cycles as short as 1/2 hour. Fours sets
of on/off trippers provided. Watertight solenoids, thermostat
and all brass plumbing construction.