DRAGON AGRO PRODUCTS
| | | | | |
Site Furnishings - Decorative Planters
| Site Furnishings Sleek contemporary lines. Rustic simplicity. Old world elegance. We offer a full spectrum of high-quality lightweight products, from pots & planters to ash & trash, for any building style. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||

Arcade Collection low bowls by Tournesol Siteworks can be used as an accent or a focal point for nearly any streetscape or plaza applictaion. The emphasis on the rim means that the pot won't be lost in a modern urban setting. The rim lends it a slightly more classic feel, but the overall shape, proportion, and absence of decoration will lend itself to modern installations as well. The FRP version has a light sand texture (shown in Iron), and is available in all metallic finishes and standard solid colors. The lightweight GFRC bowls have a smooth texture and slightly smaller inside diameter.
| Model | Material | Shape | Overall Dims. | Interior top/bottom |
| AS-2408 | FRP | Round | 24"dia x 8"h | 21"dia/11"dia |
| AS-3010 | FRP | Round | 30"dia x 10"h | 25"dia/14"dia |
| AS-3610 | FRP | Round | 36"dia x 10"h | 31"dia/16"dia |
| AS-4212 | FRP | Round | 42"dia x 12"h | 37"dia/18"dia |
| AS-4812 | FRP | Round | 48"dia x 12"h | 43"dia/20.5"dia |
| AS-6015 | FRP | Round | 60"dia x 15"h | 55"dia/24"dia |
| ACS-2408 | GFRC | Round | 24"dia x 8"h | 21"dia/11"dia |
| ACS-3010 | GFRC | Round | 30"dia x 10"h | 25"dia/14"dia |
| ACS-3610 | GFRC | Round | 36"dia x 10"h | 31"dia/16"dia |
| ACS-4212 | GFRC | Round | 42"dia x 12"h | 37"dia/18"dia |
| ACS-4812 | GFRC | Round | 48"dia x 12"h | 43"dia/20.5"dia |
| ACS-6015 | GFRC | Round | 60"dia x 15"h | 55"dia/24"dia |
* When paying by Money Order or Check (subject to 5 to 10 business days clearance) or wire transfer (Add $25). Please add Ground Shipping & handling to cost of products. Credit Card Add 3% to total. Inquire for discount schedule on volume purchases. Since we're a high volume distributor, we're passing the savings to you. Please allow a minimum of 2 weeks lead time to process your order as these planters are made to order. Returns will not be honored unless the product is deemed defective by the manufacturer.
Minimum purchase is $100. NJ
residents Please add required sales tax.

Basix pots are the complete package – they look good, they hold up well, and won’t break the budget on the job.
These rotationally molded LLD polyethylene pots are available in all Tournesol’s great-looking matrix finishes. It hides the scratches and dings that naturally come with high-traffic installations, and helps keep the pots looking new over the years. The material is full of UV-inhibitor to prevent cracking and crazing associated with less expensive plastic materials. The pots are lightweight, easy to handle during installation, and durable enough to move around without chipping or breaking.
The styling mixes the traditional shape and profile with a more sleek, slightly modern line. They fit easily with our CWI Classic container irrigation inserts. Available in sizes up to 42” in diameter, the products cost up to 40% less than our FRP collection planters.
Model |
Material |
Shape |
Overall Dims. |
Interior top/bottom |
Price |
BS-2100 |
LLDPE |
Round |
21”dia x 18”5”h |
18.5”dia/13”dia |
$110 |
BS-2400 |
LLDPE |
Round |
25.5”dia x 21.5”h |
23”dia/15”dia |
$160 |
BS-3000 |
LLDPE |
Round |
29.25”dia x 24.75”h |
26”dia/15.5”dia |
$250 |
BS-3600 |
LLDPE |
Round |
34.5”dia x 27.5”h |
30.5”dia/18”9dia |
$370 |
BS-3900 |
LLDPE |
Round |
38.75”dia x 29.5”h |
34.5”dia/20.5”dia |
$450 |
BS-4200 |
LLDPE |
Round |
42.5”dia x 34.5”h |
39”dia/23”dia |
$540 |
* When paying by Money Order or Check (subject to 5 to 10 business days clearance) or wire transfer (Add $25). Please add Ground Shipping & handling to cost of products. Credit Card Add 3% to total. Inquire for discount schedule on volume purchases. Since we're a high volume distributor, we're passing the savings to you. Please allow a minimum of 2 weeks lead time to process your order as these planters are made to order. Returns will not be honored unless the product is deemed defective by the manufacturer.
Minimum purchase is $100. NJ
residents Please add required sales tax
![]() |
![]() |
A collection in the tradition of the arts-and-crafts movement, updated for modern urban landscapes. Lightweight fiberglass and concrete planters in round, square and rectangular shapes.
To create our Arts-and-Crafts influenced collection, we were inspired by a local master. Dirk van Erp was a San Francisco designer that opened his studio in Oakland in 1910. Our pot is influenced by the vases he created during the Arts-and-Crafts heyday. The “hammered” texture applied to the fiberglass mimics the hand-hammered copper created in his workshop. Our ability to create metal-infused finishes allows the original intent he had to come through, albeit on a far larger scale than would have been possible then.
Two different materials (but it feels like more)
Tthe Craftsman Collection are manufactured in two durable, lightweight materials - fiberglass (also referred to as FRP), and glass-fiber reinforced concrete (commonly referred to as GFRC). Our fiberglass is also available in a range of metal-infused finishes, so you can get these pots in bronze, aluminum, aged copper, and iron as well! You can see our Materials & Finishes pages to help get a feel for the advantages and disadvantages of each material. The fiberglass pots have a lightly textured finish to add character and resist everyday scratching.
Sizes and shapes for the way you work
Because we understand the nature of the work you do, we make the collection in a variety of shapes and sizes. There are rounds, rectangles, and squares in sizes from small to large
Model |
Material |
Shape |
Overall Dims. |
Interior top/bottom |
Base Color |
Metallic |
CS-1800 |
FRP |
Round |
17.75”dia x 17.75”h |
14.8”dia/17.5”dia |
$170 |
$218 |
CS-2400 |
FRP |
Round |
22”dia x 22”h |
18.25”dia/20.1”dia |
$266 |
$332 |
CS-3000 |
FRP |
Round |
31”dia x 27.5”h |
26.3”dia/24.1”dia |
$451 |
$564 |
CS-3600 |
FRP |
Round |
37”dia x 30.5”h |
31.8”dia/27.9”dia |
$729 |
$908 |
CS-4200 |
FRP |
Round |
42”dia x 33.5”h |
36.3”dia/30.6”dia |
$962 |
$1199 |
CCS-1800 |
GFRC |
Round |
17.75”dia x 17.75”h |
14.8”dia/17.5”dia |
NA |
NA |
CCS-2400 |
GFRC |
Round |
22”dia x 22”h |
18.25”dia/20.1”dia |
$499 |
NA |
CCS-3000 |
GFRC |
Round |
31”dia x 27.5”h |
26.3”dia/24.1”dia |
$749 |
NA |
CCS-3600 |
GFRC |
Round |
37”dia x 30.5”h |
31.8”dia/27.9”dia |
$980 |
NA |
CCS-4200 |
GFRC |
Round |
42”dia x 33.5”h |
36.3”dia/30.6”dia |
$1347 |
NA |
CR-2400 |
FRP |
Square |
22”sq x 22”h |
20.6”/20.1” |
$350 |
$462 |
CR-3600 |
FRP |
Square |
37”sq x 27.5”h |
32.3”/31.5” |
$863 |
$1064 |
CCR-2400 |
GFRC |
Square |
22”sq x 22”h |
20.6”/20.1” |
$649 |
NA |
CCR-3600 |
GFRC |
Square |
37”sq x 27.5”h |
32.3”/31.5” |
$1299 |
NA |
CR-241818 |
FRP |
Rectangle |
24" l x 18”w x 18”h |
20.9” x 14.9”/14.3” |
$313 |
$389 |
CR-361818 |
FRP |
Rectangle |
36" l x 18”w x 18”h |
32.9” x 14.9”/14.3” |
$453 |
$587 |
CR-481818 |
FRP |
Rectangle |
48" l x 18”w x 18”h |
44.9” x 14.9”/14.3” |
$508 |
$647 |
CR-601818 |
FRP |
Rectangle |
60" l x 18”w x 18”h |
56.9” x 14.9”/14.3” |
$627 |
$797 |
CCR-241818 |
GFRC |
Rectangle |
24”l x 18”w x 18”h |
20.9” x 14.9”/14.3” |
$467 |
NA |
CCR-361818 |
GFRC |
Rectangle |
36”l x 18”w x 18”h |
32.9” x 14.9”/14.3” |
$588 |
NA |
CCR-481818 |
GFRC |
Rectangle |
48”l x 18”w x 18”h |
44.9” x 14.9”/14.3” |
$753 |
NA |
CCR-601818 |
GFRC |
Rectangle |
60”l x 18”w x 18”h |
56.9” x 14.9”/14.3” |
$902 |
NA |
* When paying by Money Order or Check (subject to 5 to 10 business days clearance) or wire transfer (Add $25). Please add Ground Shipping & handling to cost of products. Credit Card Add 3% to total. Inquire for discount schedule on volume purchases. Since we're a high volume distributor, we're passing the savings to you. Please allow a minimum of 2 weeks lead time to process your order as these planters are made to order. Returns will not be honored unless the product is deemed defective by the manufacturer.
Minimum purchase is $100. NJ
residents Please add required sales tax.

Modern is the new classic! By adding a distinctive curve and soft corners, Tournesol Siteworks has created a new classic container, the Downtown Collection. Continuing the tall, elegant proportions of the best-selling Urban Collection, it adds flair to any modern project. The FRP fiberglass version of the collection has a light sand texture (shown), and is available in any metallic or standard finish. The lightweight GFRC containers have a smooth texture. All round, square and rectangular shapes carry the distinctive tall proportions, while two of the round sizes also come is a shorter variation.
Model |
Material |
Shape |
Overall Dims. |
Interior top/bottom |
Base Color |
Metallic |
| DS-1800 | FRP | Round | 18"dia x 18"h | 14"dia/13"dia | $170 |
$218 |
| DS-2400 | FRP | Round | 24"dia xc 27"h | 20"dia/15"dia | $266 |
$332 |
| DS-2418 | FRP | Round | 24"dia x 18"h | 20"dia/13"dia | $255 |
$299 |
| DS-3000 | FRP | Round | 30"dia x 32"h | 26"dia/18"dia | $449 |
$564 |
| DS-3600 | FRP | Round | 36"dia x 34"h | 32"dia/22"dia | $729 |
$908 |
| DS-3624 | FRP | Round | 36"dia x 24"h | 32"dia/18"dia | $522 |
$643 |
| DS-4200 | FRP | Round | 42"dia x 36"h | 38"dia/26"dia | $962 |
$1199 |
| DCS-2400 | GFRC | Round | 24"dia xc 27"h | 20"dia/13"dia | $499 |
NA |
| DCS-3000 | GFRC | Round | 30"dia x 32"h | 26"dia/15"dia | $766 |
NA |
| DCS-3600 | GFRC | Round | 36"dia x 34"h | 32"dia/19"dia | $999 |
NA |
| DCS-4200 | GFRC | Round | 42"dia x 36"h | 38"dia/23"dia | $1449 |
NA |
| DR-2400 | FRP | Square | 24"sq x 27"h | 20"sq/15"sq | $386 |
$499 |
| DR-3000 | FRP | Square | 30”sq x 37”h | 26”sq/15”sq | $551 |
$724 |
| DR-3600 | FRP | Square | 36"sq x 34"h | 32"sq/22"sq | $878 |
$1098 |
| DR-4800 | FRP | Square | 48”sq x 36”h | 44”sq/22”sq | $1435 |
$1831 |
| DCR-2400 | GFRC | Square | 24"sq x 27"h | 20"sq/13"sq | $671 |
NA |
| DCR-3600 | GFRC | Square | 36"sq x 34"h | 32"sq/19"sq | $1331 |
NA |
| DR-241818 | FRP | Rectangle | 24"l x 18"w x 18"h | 20" x 14"/13.8" | $344 |
$403 |
| DR-361818 | FRP | Rectangle | 36"l x 18"w x 18"h | 32" x 14"/13.8" | $451 |
$564 |
| DR-481818 | FRP | Rectangle | 48"l x 18"w x 18"h | 44" x 14"/13.8" | $545 |
$646 |
| DR-601818 | FRP | Rectangle | 60"l x 18"w x 18"h | 56" x 14"/13.8" | $641 |
$825 |
| DCR-241818 | GFRC | Rectangle | 24"l x 18"w x 18"h | 20" x 14"/12" | $522 |
NA |
| DCR-361818 | GFRC | Rectangle | 36"l x 18"w x 18"h | 20" x 14"/12" | $688 |
NA |
| DCR-481818 | GFRC | Rectangle | 48"l x 18"w x 18"h | 20" x 14"/12" | $861 |
NA |
| DCR-601818 | GFRC | Rectangle | 60"l x 18"w x 18"h | 20" x 14"/12" | $1021 |
NA |
* When paying by Money Order or Check (subject to 5 to 10 business days clearance) or wire transfer (Add $25). Please add Ground Shipping & handling to cost of products. Credit Card Add 3% to total. Inquire for discount schedule on volume purchases. Since we're a high volume distributor, we're passing the savings to you. Please allow a minimum of 2 weeks lead time to process your order as these planters are made to order. Returns will not be honored unless the product is deemed defective by the manufacturer.
Minimum purchase is $100. NJ residents Please add required sales tax.
![]() |
![]() |
Take your classic old-world feel, and update it for today's urban environment. Give it great metallic finsihes, and you end up with the Empire Collection.
Why recreate the past when you can take inspiration and move forward with it? The Empire Collection is our version of the classic “garland planter”, without looking just like every other garland planter. It fits with traditional construction styles without looking hide-bound. It’s elegant proportions and classic metal-infused finishes make this collection feel truly timeless.
We understand the nature of the work you do, so we make the collection in a variety of shapes and sizes. There are rounds, rectangles, and squares in sizes from small to large. Because of the need for the hand-detailed finishing, these planters are only created in fiberglass materials. They are available in both standard and metal-infused fiberglass finishes.
Model |
Material |
Shape |
Overall Dims. |
Interior top/bottom |
ES-1800 |
FRP |
Round |
18”dia x 15”h |
15.5”dia/15”dia |
ES-2400 |
FRP |
Round |
24.5”dia x 20.5”h |
19.5”dia/20.5”dia |
ES-3000 |
FRP |
Round |
31”dia x 27”h |
25”dia/24.5”dia |
ES-3600 |
FRP |
Round |
37”dia x 30”h |
32”dia/30”dia |
ES-4200 |
FRP |
Round |
43”dia x 33”h |
38.75”dia/33”dia |
ER-2400 |
FRP |
Square |
26.5”sq x 24.5”h |
22.75”/20” |
ER-3600 |
FRP |
Square |
37”sq x 27.5”h |
32.3”/31.5” |
ER-241818 |
FRP |
Rectangle |
24" l x 18”w x 24”h |
21.7” x 15.7”/13.5” |
ER-361818 |
FRP |
Rectangle |
36" l x 18”w x 24”h |
33.7” x 15.7”/13.5” |
ER-481818 |
FRP |
Rectangle |
48" l x 18”w x 24”h |
45.7” x 15.7”/13.5” |
ER-601818 |
FRP |
Rectangle |
60" l x 18”w x 24”h |
57.7” x 15.7”/13.5” |
* When paying by Money Order or Check (subject to 5 to 10 business days clearance) or wire transfer (Add $25). Please add Ground Shipping & handling to cost of products. Credit Card Add 3% to total. Inquire for discount schedule on volume purchases. Since we're a high volume distributor, we're passing the savings to you. Please allow a minimum of 2 weeks lead time to process your order as these planters are made to order. Returns will not be honored unless the product is deemed defective by the manufacturer.
Minimum purchase is $100. NJ
residents Please add required sales tax.

The Metro Collection gives an updated, modern look and feel for any commercial project. Available in lightweight fiberglass and concrete.
Where can you turn when you want something less traditional, yet not rigid and boring? The Metro Collection was born out of a desire to do something that would work with current architecture, but wouldn’t feel cold and featureless. We gave the form a seductive curve, then texture the fiberglass versions to give it character (the GFRC is typically naturally textured). Whether in fiberglass, metallic infused, or GFRC, you’ll agree that this collection can work in most urban settings.
Two different materials (but it feels like more)
The Metro Collection are manufactured in two durable, lightweight materials - fiberglass (also referred to as FRP), and glass-fiber reinforced concrete (commonly referred to as GFRC). Our fiberglass is also available in a range of metal-infused finishes, so you can get these pots in bronze, aluminum, aged copper, and iron as well! You can see our Materials & Finishes pages to help get a feel for the advantages and disadvantages of each material. The fiberglass pots have a lightly textured finish to add character and resist everyday scratching.
Sizes and shapes for the way you work
Because we understand the nature of the work you do, we make the collection in a variety of shapes and sizes. There are rounds, rectangles, and squares in sizes from small to large. We also offer matching trash and ash cans for the Metro Collection, and saucers to match everything.
Model |
Material |
Shape |
Overall Dims. |
Interior top/bottom |
Std. Color Price |
Metallic Color Price |
MS-1800 |
FRP |
Round |
20”dia x 21”h |
14.8”dia/14.8”dia |
$180 |
$231 |
MS-2400 |
FRP |
Round |
26”dia x 25”h |
20”dia/18.5”dia |
$280 |
$350 |
MS-3000 |
FRP |
Round |
30”dia x 28”h |
24”dia/24”dia |
$475 |
$593 |
MS-3600 |
FRP |
Round |
36”dia x 31”h |
29.5”dia/29.2”dia |
$767 |
$956 |
MS-4200 |
FRP |
Round |
42”dia x 34”h |
34.9”dia/34.6”dia |
$995 |
$1250 |
MCS-2400 |
GFRC |
Round |
26”dia x 25”h |
20”dia/18.5”dia |
$522 |
n/a |
MCS-3000 |
GFRC |
Round |
30”dia x 28”h |
24”dia/24”dia |
$778 |
n/a |
MCS-3600 |
GFRC |
Round |
36”dia x 31”h |
29.5”dia/29.2”dia |
$1002 |
n/a |
MCS-4200 |
GFRC |
Round |
42”dia x 34”h |
34.9”dia/34.6”dia |
$1487 |
n/a |
MR-1800 |
FRP |
Square |
20”sq x 21”h |
14.8”/14.8” |
$237 |
$318 |
MR-2400 |
FRP |
Square |
24”sq x 25”h |
18.75”/16.5” |
$368 |
$486 |
MR-3000 |
FRP |
Square |
30”sq x 28”h |
24”/23” |
$580 |
$770 |
MR-3600 |
FRP |
Square |
36”sq x 31”h |
29.5”/29.2” |
$907 |
$1120 |
MCR-2400 |
GFRC |
Square |
24”sq x 25”h |
18.75”/16.5” |
$687 |
n/a |
MCR-3000 |
GFRC |
Square |
30”sq x 28”h |
24”/23” |
$931 |
n/a |
MCR-3600 |
GFRC |
Square |
36”sq x 31”h |
29.5”/29.2” |
$1331 |
n/a |
MR-241818 |
FRP |
Rectangle |
24”l x 18”w x 18”h |
19.5” x 14.4”/14.2” |
$330 |
$410 |
MR-361818 |
FRP |
Rectangle |
36”l x 18”w x 18”h |
31.5” x 14.4”/14.2” |
$435 |
$618 |
MR-481818 |
FRP |
Rectangle |
48”l x 18”w x 18”h |
43.5” x 14.4”/14.2” |
$535 |
$681 |
MR-601818 |
FRP |
Rectangle |
60”l x 18”w x 18”h |
55.5” x 14.4”/14.2” |
$660 |
$838 |
MCR-241818 |
GFRC |
Rectangle |
24”l x 18”w x 18”h |
19.5” x 14.4”/14.2” |
$487 |
n/a |
MCR-361818 |
GFRC |
Rectangle |
36”l x 18”w x 18”h |
31.5” x 14.4”/14.2” |
$618 |
n/a |
MCR-481818 |
GFRC |
Rectangle |
48”l x 18”w x 18”h |
43.5” x 14.4”/14.2” |
$793 |
n/a |
MCR-601818 |
GFRC |
Rectangle |
60”l x 18”w x 18”h |
55.5” x 14.4”/14.2” |
$946 |
n/a |
MS-ASH |
FRP |
Round |
18”dia x 24”h |
Powder coated Ash Lid |
$382 |
$477 |
MCS-ASH |
GFRC |
Round |
18”dia x 24”h |
Powder Coated Ash Lid |
$504 |
NA |
MS-TRS |
FRP |
Round |
24”dia x 30”h |
Powder Coated Ash Lid, |
$618 |
$699 |
MCS-TRS |
GFRC |
Round |
24”dia x 30”h |
Powder Coated Ash Lid, LLDPE Liner |
$702 |
NA |
* When paying by Money Order or Check (subject to 5 to 10 business days clearance) or wire transfer (Add $25). Please add Ground Shipping & handling to cost of products. Credit Card Add 3% to total. Inquire for discount schedule on volume purchases. Since we're a high volume distributor, we're passing the savings to you. Please allow a minimum of 2 weeks lead time to process your order as these planters are made to order. Returns will not be honored unless the product is deemed defective by the manufacturer.
Minimum purchase is $100. NJ
residents Please add required sales tax.

Get the traditional "mediterranean" look and feel without the weight. The Plaza Collection has the bold lines and strong proportions of old world containers. The design is flexible, and accents nearly any building or streetscape design. The entire collection is available in either lightweight FRP fiberglass, or GFRC Concrete, and can be any of standard, metallic, or GFRC finishes. Typically it is produced in a light sand texture, although a smooth texture is also an option.
Model |
Material |
Shape |
Overall Dims. |
Interior top/bottom |
Base Color |
Metallic |
| PS-2400 | FRP | Round | 24"dia x 24"h | 15"dia/12"dia | $266 |
$332 |
| PS-3000 | FRP | Round | 30"dia x 27.5"h | 21"dia/16"dia | $451 |
$563 |
| PS-3600 | FRP | Round | 36"dia x 30"h | 24.1"dia/22"dia | $729 |
$908 |
| PS-4800 | FRP | Round | 48"dia x 30"h | 36.1"dia/34"dia | $1083 |
$1314 |
| PCS-2400 | GFRC | Round | 24"dia x 24"h | 15"dia/10"dia | $499 |
NA |
| PCS-3000 | GFRC | Round | 30"dia x 27.5"h | 21"dia/14"dia | $727 |
NA |
| PCS-3600 | GFRC | Round | 36"dia x 30"h | 24.1"dia/20"dia | $980 |
NA |
| PCS-4800 | GFRC | Round | 48"dia x 30"h | 36.1"dia/32"dia | $1347 |
NA |
| PR-2400 | FRP | Square | 24"sq x 24"h | 18"/11" | $349 |
$462 |
| PR-3600 | FRP | Square | 36"sq x 30"h | 24.1"/20" | $863 |
$1064 |
| PCR-2400 | GFRC | Square | 24"sq x 24"h | 18"/9" | $649 |
NA |
| PCR-3600 | GFRC | Square | 36"sq x 30"h | 24.1"/20" | $1309 |
NA |
| PR-241818 | FRP | Rectangle | 24"l x 18"w x 18"h | 18" x 12"/10" | $313 |
$389 |
| PR-361818 | FRP | Rectangle | 36"l x 18"w x 18"h | 30" x 12"/10" | $412 |
$587 |
| PR-481818 | FRP | Rectangle | 48"l x 18"w x 18"h | 42" x 12"/10" | $508 |
$647 |
| PR-601818 | FRP | Rectangle | 60"l x 18"w x 18"h | 54" x 12"/10" | $627 |
$797 |
| PCR-241818 | GFRC | Rectangle | 24"l x 18"w x 18"h | 18" x 12"/8" | $467 |
NA |
| PCR-361818 | GFRC | Rectangle | 36"l x 18"w x 18"h | 30" x 12"/8" | $588 |
NA |
| PCR-481818 | GFRC | Rectangle | 48"l x 18"w x 18"h | 42" x 12"/8" | $753 |
NA |
| PCR-601818 | GFRC | Rectangle | 60"l x 18"w x 18"h | 54" x 12"/8" | $902 |
NA |
* When paying by Money Order or Check (subject to 5 to 10 business days clearance) or wire transfer (Add $25). Please add Ground Shipping & handling to cost of products. Credit Card Add 3% to total. Inquire for discount schedule on volume purchases. Since we're a high volume distributor, we're passing the savings to you. Please allow a minimum of 2 weeks lead time to process your order as these planters are made to order. Returns will not be honored unless the product is deemed defective by the manufacturer.
Minimum purchase is $100. NJ
residents Please add required sales tax
Lightweight Planters with Built-in Irrigation, SeaCrest Series lightweight planters with built-in CWS irrigation permit tremendous flexibility with larger site-furnishing sized containers. The CWS irrigation system means minimal maintenance (just refill the water reservoir every 2-4 weeks), and requires no complicated plumbing. An exterior drainage adapter (see reverse side) eliminates stained pavement and removes the need for saucers. Polyethylene double-wall construction is lightweight enough to be moved, but so durable that it will withstand automobile impact.
Applications
The perfect solution for roofdecks, balconies, and difficult-to-irrigate locations.
Durable enough for sidewalk or parking lot use. Elegant enough to be used in
lobbies and atriums.
Materials/Construction
Seamless, one-piece units formed from cross-link or linear low-density polyethylene.
Available in seven rich matrix (faux stone) finishes, and a variety of solid
colors. All SeaCrest Series planters have a lightly textured pebbled finish.
Will not crack, chip or break in temperatures from -40° to 140°F. SeaCrest
Series planters are graffiti resistant, and incorporate the maximum UV inhibitor
package. Planters withstand cold weather and freeze/thaw cycles.

Click Installation Manual.
| Model | Outside Dim | Inside Dim | Water Capacity. | Soil Capacity | Dry Weight | Full Weight | Price* |
| SS-2417 | 24"dia x 17"h | 21"/15" x 13"h | 11 gal | 2.5 cu. ft | 20 lbs | 240 lbs | $390 |
| SS-2422 | 24"dia x 22"h | 21"/18" x 18"h | 15 gal | 4 cu. ft | 24 lbs. | 350lbs | $418 |
| SS-3022 | 32"dia. x 22"h | 27"/23" x 19"h | 21 gal | 5.4 cu. ft | 35 lbs | 460 lbs. | $605 |
| SS-3817 | 38"dia. x 17"h | 33"/29" x 14"h | 19 gal | 5.5 cu. ft | 35 lbs | 440 lbs. | $891 |
| SS-3822 | 38"dia. x 22"h | 33"/29" x 17"h | 23 gal | 6.75 cu. ft | 55 lbs | 550 lbs. | $1197 |
| SS-3830 | 38"dia. x 30"h | 33"/29" x 25"h | 26 gal | 9 cu. ft. | 65 lbs | 687 lbs. | $1440 |
| SS-4830 | 48"dia. x 30"h | 43"/39" x 25"h | 40 gal. | 18 cu. ft | 100 lbs | 1300 lbs | $1795 |
| SS-5517 | 55"dia. x 17"h | 50"/38" x 14"h | 35 gal | 8.75 cu. ft | 100 lbs | 780 lbs | $1150 |
| SS-5536 | 55"dia. x 36"h | 50"/38" x 32"h | 76 gal. | 23.75 cu. ft | 180 lbs | 1880 lbs. | $2511 |
| SR-242422 | 24" sq. x 22"h | 20"x20"x18.5" | 22 gal | 3.8 cu. ft. | 30 lbs | 400 lbs | $533 |
| SR-383824 | 38" sq. x 24"h | 34"x34"x21" | 28 gal. | 10 cu. ft. | 75 lbs. | 800 lbs. | $1251 |
| SR-482422 | 48"l x 24"w x 22"h | 42"x18"19.5" | 35 gal | 7 cu. ft | 43 lbs | 640 lbs. | $1251 |
| SR-722422 | 72"l x 24"w x 22"h | 66"x18"19.5" | 51 gal. | 11 cu. ft. | 65 lbs | 970 lbs. | $1431 |
| SR-723222 | 72"l x 32"w x 22"h | 66"x27"19.5" | 69 gal | 18 cu. ft | 90 lbs | 1500 lbs | $1665 |
* When paying by Money Order or Check (subject to 5 to 10 business days clearance) or wire transfer (Add $25). Please add Ground Shipping & handling to cost of products. Credit Card Add 3% to total. Inquire for discount schedule on volume purchases. Since we're a high volume distributor, we're passing the savings to you. Please allow a minimum of 2 weeks lead time to process your order as these planters are made to order. Returns will not be honored unless the product is deemed defective by the manufacturer.
Minimum purchase is $100. NJ
residents Please add required sales tax.

A tall profile and modern shape make this a truly urban planter. The lightweight fiberglass and concrete finishes make it durable enough for today's world.
The Urban Collection reflects the contemporary mood of today's discerning client. Sleek, simple, and elegantly proportioned, they work with most modern designs. Available in any Tournesol Siteworks metallic finish (Aged Copper, Aluminum, Cement and Bronze are shown at right), as well as all of our standard solid colors. The round, square and rectangular shapes all carry the distinctive tall proportions.
Two different materials (but it feels like more)
The Urban Collection are manufactured in two durable, lightweight materials - fiberglass (also referred to as FRP), and glass-fiber reinforced concrete (commonly referred to as GFRC). Our fiberglass is also available in a range of metal infused finishes, so you can get these pots in bronze, aluminum, aged copper, and iron as well! You can see our Materials & Finishes pages to help get a feel for the advantages and disadvantages of each material. The fiberglass pots have a lightly textured finish to add character and resist everyday scratching.
Sizes and shapes for the way you work
Because we understand the nature of the work you do, we make the collection in a variety of shapes and sizes. There are rounds, rectangles, and squares in sizes from small to large. We also offer matching trash and ash cans for the Urban Collection, and saucers to match everything.
Model |
Material |
Shape |
Overall Dims. |
Interior top/bottom |
Base Color Price |
Metallic Color Price |
US-1800 |
FRP |
Round |
18”dia x 24”h |
14”dia/13”dia |
$180 |
$232 |
US-2400 |
FRP |
Round |
24”dia x 27”h |
20”dia/18.5”dia |
$280 |
$350 |
US-3000 |
FRP |
Round |
30”dia x 32”h |
26”dia/25”dia |
$475 |
$590 |
US-3600 |
FRP |
Round |
36”dia x 34”h |
32”dia/31”dia |
$767 |
$950 |
US-4200 |
FRP |
Round |
42”dia x 36”h |
38”dia/37”dia |
$1000 |
$1250 |
UCS-2400 |
GFRC |
Round |
24”dia x 27”h |
20”dia/18.5”dia |
$530 |
n/a |
UCS-3000 |
GFRC |
Round |
30”dia x 32”h |
26”dia/25”dia |
$806 |
n/a |
UCS-3600 |
GFRC |
Round |
36”dia x 34”h |
32”dia/31”dia |
$1056 |
n/a |
UCS-4200 |
GFRC |
Round |
42”dia x 36”h |
38”dia/37”dia |
$1532 |
n/a |
UR-1800 |
FRP |
Square |
18”sq x 24”h |
14”/13” |
$248 |
$331 |
UR-2400 |
FRP |
Square |
24”sq x 27”h |
20”/16.5” |
$406 |
$531 |
UR-3000 |
FRP |
Square |
30”sq x 34”h |
26”/24” |
$587 |
$781 |
UR-3600 |
FRP |
Square |
36”sq x 34”h |
32”/29.2” |
$925 |
$1156 |
UR-4800 |
FRP |
Square |
48"sq x 42"h |
44" / 40" |
$1525 |
$1956 |
URT-2400 |
FRP |
Square |
24”sq x 48”h |
22"”/20" |
$730 |
$975 |
UCR-2400 |
GFRC |
Square |
24”sq x 27”h |
20”/16.5” |
$706 |
n/a |
UCR-3000 |
GFRC |
Square |
30”sq x 34”h |
26”/24” |
$1056 |
n/a |
UCR-3600 |
GFRC |
Square |
36”sq x 34”h |
32”/29.2” |
$1400 |
n/a |
UCR-4800 |
GFRC |
Square |
48"sq x 42"h |
44" / 40" |
$1968 |
n/a |
UCRT-2400 |
GFRC |
Square |
24" sq x 48"h |
22" / 20" |
$1131 |
n/a |
UR-241824 |
FRP |
Rectangle |
24”l x 18”w x 24”h |
20” x 14”/13” |
$362 |
$425 |
UR-361824 |
FRP |
Rectangle |
36”l x 18”w x 24”h |
32” x 14”/13” |
$475 |
$593 |
UR-481824 |
FRP |
Rectangle |
48”l x 18”w x 24”h |
44” x 14”/13” |
$575 |
$681 |
UR-601824 |
FRP |
Rectangle |
60”l x 18”w x 24”h |
56” x 14”/13” |
$675 |
$868 |
UCR-241824 |
GFRC |
Rectangle |
24”l x 18”w x 24”h |
20” x 14”/13” |
$550 |
n/a |
UCR-361824 |
GFRC |
Rectangle |
36”l x 18”w x 24”h |
32” x 14”/13” |
$725 |
n/a |
UCR-481824 |
GFRC |
Rectangle |
48”l x 18”w x 24”h |
44” x 14”/13” |
$906 |
n/a |
UCR-601824 |
GFRC |
Rectangle |
60”l x 18”w x 24”h |
56” x 14”/13” |
$1075 |
n/a |
* When paying by Money Order or Check (subject to 5 to 10 business days clearance) or wire transfer (Add $25). Please add Ground Shipping & handling to cost of products. Credit Card Add 3% to total. Inquire for discount schedule on volume purchases. Since we're a high volume distributor, we're passing the savings to you. Please allow a minimum of 2 weeks lead time to process your order as these planters are made to order. Returns will not be honored unless the product is deemed defective by the manufacturer.
Minimum purchase is $100. NJ
residents Please add required sales tax.
![]() |
![]() |
How do you go traditional in a modern world? The Village Collection are lightweight fiberglass and concrete planters that add grace to any application.
The Village Collection is at home in nearly any urban setting. The style, with it’s slight taper and elegant foot, give a traditional impression without really being traditional. Because the Village is our own design, it isn’t something that you’ll be seeing on every corner.
Two different materials (but it feels like more)
The Village Collection are manufactured in two durable, lightweight materials - fiberglass (also referred to as FRP), and glass-fiber reinforced concrete (commonly referred to as GFRC). Our fiberglass is also available in a range of metal infused finishes, so you can get these pots in bronze, aluminum, aged copper, and iron as well! The fiberglass pots have a lightly textured finish to add character and resist everyday scratching.
Sizes and shapes for the way you work
Because we understand the nature of the work you do, we make the collection in a variety of shapes and sizes. There are rounds, rectangles, and squares in sizes from small to large. We also offer matching trash and ash cans for the Village Collection, and saucers to match everything.
Model |
Material |
Shape |
Overall Dims. |
Interior top/bottom |
Base Color |
Metallic |
VS-1800 |
FRP |
Round |
19.5”dia x 20”h |
14.7”dia/17.5”dia |
$170 |
$218 |
VS-2400 |
FRP |
Round |
23.5”dia x 23.75”h |
20”dia/22.5”dia |
$266 |
$332 |
VS-3000 |
FRP |
Round |
30.5”dia x 29.5”h |
25.5”dia/29.5”dia |
$451 |
$564 |
VS-3600 |
FRP |
Round |
36.5”dia x 30”h |
30.75”dia/35.5dia |
$729 |
$908 |
VS-4200 |
FRP |
Round |
42.5”dia x 33”h |
36”dia/41.5”dia |
$962 |
$1199 |
VS-6000 |
FRP |
Round |
60.5”dia x 34.5”h |
54”dia/59”dia |
$1424 |
$1815 |
VCS-1800 |
GFRC |
Round |
19.5”dia x 20”h |
14.7”dia/17.5”dia |
NA |
NA |
VCS-2400 |
GFRC |
Round |
23.5”dia x 23.75”h |
20”dia/22.5”dia |
$502 |
NA |
VCS-3000 |
GFRC |
Round |
30.5”dia x 29.5”h |
25.5”dia/29.5”dia |
$727 |
NA |
VCS-3600 |
GFRC |
Round |
36.5”dia x 30”h |
30.75”dia/35.5dia |
$980 |
NA |
VCS-4200 |
GFRC |
Round |
42.5”dia x 33”h |
36”dia/41.5”dia |
$1347 |
NA |
VCS-6000 |
GFRC |
Round |
60.5”dia x 34.5”h |
54”dia/59”dia |
NA |
NA |
VR-1800 |
FRP |
Square |
19.75” sq x 20” h |
14.7”/ 13.5” |
$225 |
$299 |
VR-2400 |
FRP |
Square |
24” sq x 24.5”h |
18.75”/ 17.5” |
$349 |
$462 |
VR-3000 |
FRP |
Square |
30.5” sq x 27”h |
25.5”/ 24.5” |
$551 |
$724 |
VR-3600 |
FRP |
Square |
36.5” sq x 30”h |
32”/ 30.6” |
$863 |
$1064 |
VR-4800 |
FRP |
Square |
48” sq x 32”h |
43”/ 41” |
$1435 |
$1831 |
VCR-1800 |
GFRC |
Square |
19.75”sq x 20”h |
14.7”/13.5” |
NA |
NA |
VCR-2400 |
GFRC |
Square |
24”sq x 24.5”h |
18.75”/17.5” |
$649 |
NA |
VCR-3000 |
GFRC |
Square |
30.5”sq x 27”h |
25.5”/24.5” |
$885 |
NA |
VCR-3600 |
GFRC |
Square |
36.5”sq x 30”h |
32”/30.6” |
$1309 |
NA |
VCR-4800 |
GFRC |
Square |
48”sq x 32”h |
43”/41” |
$1870 |
NA |
VR-241818 |
FRP |
Rectangle |
24.5”l x 18.5”w x 18”h |
20.7” x 14.6”/13.6” |
$313 |
$389 |
VR-361818 |
FRP |
Rectangle |
36”l x 18.5”w x 18”h |
32.7” x 14.6”/13.6” |
$412 |
$587 |
VR-481818 |
FRP |
Rectangle |
48”l x 18.5”w x 18”h |
44.7” x 14.6”/13.6” |
$508 |
$647 |
VR-601818 |
FRP |
Rectangle |
60”l x 18.5”w x 18”h |
56.7” x 14.6”/13.6” |
$627 |
$797 |
VCR-241818 |
GFRC |
Rectangle |
24.5”l x 18.5”w x 18”h |
20.7” x 14.6”/13.6” |
$467 |
NA |
VCR-361818 |
GFRC |
Rectangle |
36”l x 18.5”w x 18”h |
32.7” x 14.6”/13.6” |
$588 |
NA |
VCR-481818 |
GFRC |
Rectangle |
48”l x 18.5”w x 18”h |
44.7” x 14.6”/13.6” |
$753 |
NA |
VCR-601818 |
GFRC |
Rectangle |
60”l x 18.5”w x 18”h |
56.7” x 14.6”/13.6” |
$902 |
NA |
VS-ASH |
FRP |
Round |
18”dia x 24”h |
Powder coated Ash Lid |
$382 |
$477 |
VCS-ASH |
GFRC |
Round |
18”dia x 24”h |
Powder Coated Ash Lid |
$504 |
NA |
* When paying by Money Order or Check (subject to 5 to 10 business days clearance) or wire transfer (Add $25). Please add Ground Shipping & handling to cost of products. Credit Card Add 3% to total. Inquire for discount schedule on volume purchases. Since we're a high volume distributor, we're passing the savings to you. Please allow a minimum of 2 weeks lead time to process your order as these planters are made to order. Returns will not be honored unless the product is deemed defective by the manufacturer.
Minimum purchase is $100. NJ
residents Please add required sales tax.

Sometimes the simplest designs make the strongest impressions. The Wilshire Collection is nothing fancy - straight walls and a slight reveal. Put several of them together and it creates a highly effective way to structure space, using live plants. The elegant straight lines disappear, emphasizing the natural & the green, as it should be. Availabe in a wide range of sizes, our rectangular planters can simply be set on the ground or roof, or mounted on a spandrel wall (we normally will recommend reinforcing the bottom to aid attachment). If you'd like the same thing wall mounted, see our Wilshire Boxes. The collection is available in either lightweight FRP fiberglass and GFRC concrete, in all our standard finishes. They are typically made smooth, but the light sand finish is also an option.
Tournesol makes it easy for you to get the complete solution for your project:
Two different materials (but it feels like more)
The Wilshire Collection pots are manufactured in two durable, lightweight materials - fiberglass (also referred to as FRP), and glass-fiber reinforced concrete (commonly referred to as GFRC). Our fiberglass is also available in a range of metal infused finishes, so you can get these pots in bronze, aluminum, aged copper, and iron as well! You can see our Materials & Finishes pages to help get a feel for the advantages and disadvantages of each material. The fiberglass pots have a light sand texture to add character and resist everyday scratching.
Sizes and shapes for the way you work
Because we understand the nature of the work you do, we make the collection in a variety of shapes and sizes. There are rounds, rectangles, and squares in sizes from small to large. We also offer matching trash and ash cans for the Wilshire Collection, and saucers to match everything.
If you need something you don’t already see here, ask our helpful sales team. We’ve probably already done something like it for another application.
|
CWI Classic (CWC) Container Irrigation Inserts – Keep maintenance to a minimum by using a manual-fill container irrigation system with the Wilshire Collection. Extends maintenance intervals up to 4x longer than with hand-watering. This water-smart technology keeps irrigation water in, controls rainwater.
AutoFill automatic container irrigation systems – not only an effective maintenance solution, but a water-effective one as well. The fully plumbed units rely on the AutoFill automatic irrigation valve and a low-pressure irrigation line.
Fiberglass Saucers – Tournesol Siteworks creates a range of saucers to coordinate with the Wilshire Collection planters.
Drainage Products – the most important topic when it comes to water. How can we keep our surfaces clean, and control drain water? Tournesol produces a range of simple yet effective drainage strategies depending upon your maintenance schedule. Help keep our sidewalks clean – prevent your planters from draining on them

For all fiberglass, GFRC composite stone and polyethylene decorative planters. All saucers are manufactured in round, square and rectangular in lightweight fiberglass.
Model |
Material |
Shape |
Overall Dims. |
SC-18 |
FRP |
Round |
18”dia x 1.5”h |
SC-19 |
FRP |
Round |
19”dia x 1.5”h |
SC-25 |
FRP |
Round |
25”dia x 1.5”h |
SC-31 |
FRP |
Round |
31”dia x 1.5”h |
SC-37 |
FRP |
Round |
37”dia x 1.5”h |
SC-43 |
FRP |
Round |
43”dia x 1.5”h |
SC-61 |
FRP |
Round |
61”dia x 1.5”h |
SC-1717 |
FRP |
Square |
17” sq. x 1.5” h |
SC-2525 |
FRP |
Square |
25” sq. x 1.5” h |
SC-3131 |
FRP |
Square |
31” sq. x 1.5” h |
SC-3636 |
FRP |
Square |
36” sq. x 1.5” h |
SC-4949 |
FRP |
Square |
49” sq. x 1.5” h |
SC-2418 |
FRP |
Rectangle |
24" l x 18”w x 1.5”h |
SC-3618 |
FRP |
Rectangle |
36" l x 18”w x 1.5”h |
SC-4818 |
FRP |
Rectangle |
48" l x 18”w x 1.5”h |
SC-6018 |
FRP |
Rectangle |
60" l x 18”w x 1.5”h |
* When paying by Money Order or Check (subject to clearance), . Please add Ground Shipping & handling to cost of products. Credit Card Add 3% to total. Inquire for discount schedule on volume purchases. Since we're a high volume distributor, we're passing the savings to you. Please allow a minimum of 2 weeks lead time to process your order as these planters are made to order. Returns will not be honored unless the product is deemed defective by the manufacturer.
Minimum purchase is $100. NJ
residents Please add required sales tax.

We get more questions about drainage than anything else. Our drainage systems can be used to pump out planters, provide overflow drainage, and control drainage in most applications.
The two most common problems with pots & planters are irrigation and drainage. We've been dealing with irrigation issues for over 25 years - now we're working on drainage, too. Whether the application requires no drainage, overflow drainage, or plumbed solutions, we have a product that will work for you. While designed to integrate with most Tournesol products (including our irrigation systems), they can be used equally well with pots or planters from any manufacturer.
Our drainage control products are designed to be used with specific drainage treatment scenarios:
Scenario 1 - No free drainage. If the application is critical and manpower is available, a pot can be installed without a drainhole. A siphon or pump-out tube (our drainage product DR1) is inserted through the soil into a gravel/drainage layer below, which allows maintenance to pump out excess water as necessary. The siphon tube can also be used to monitor the level of water built up in the container.
Scenario 2 - Overflow Drainage. The bottom of the pot is closed, but excess water is allowed to drain either into a sauceror free drain. The DR2 system provides for the ability to pump out the planter (if required), but will allow excess water to free drain after a rain. Very effective in applications using Tournesol's Container Irrigation Systems. The drainage head may also be attached to a flexible tube.
Scenario 3 - Overflow, no Siphon Tube. The bottom of the pot is closed, and excess water is allowed to drain (as in Scenario 2), but no siphon tube is required. The TODA (Tournesol Overflow Drainage Adapter) features a valved stopcock which may be left closed (and opened as required), or simply left open to allow for excess water overflow.
Secanario 4 - Plumbed drainage solutions. For those applications where the drainage will be plumbed, Tournesol Siteworks can offer drainage adapters in standard sizes between 1/2" and 1" dia. These units can be installed in pots, planters and liners, and are double-gasketed for a positive seal.
Model |
Description |
DR1-1 |
Drainage system 1, includes pump-out tube, “T” and sleeve (no pipe loop) |
DR1-2 |
Drainage system 1, includes pump-out tube, drainage pipe and sleeve, for 2’ pots |
DR1-3 |
Drainage system 1, includes pump-out tube, drainage pipe and sleeve, for 3’ pots |
DR1-4 |
Drainage system 1, includes pump-out tube, drainage pipe and sleeve, for 4’ pots |
DR2-1 |
Drainage system 2, includes pump out tube and side discharge adapter, no pipe loop |
DR2-2 |
Drainage system 2, includes pump-out tube, side discharge overflow adapter, for 2’ pots |
DR2-3 |
Drainage system 2, includes pump-out tube, side discharge overflow adapter, for 2’ pots |
DR2-4 |
Drainage system 2, includes pump-oput tube, side discharge overflow adapter, for 4’ pots |
TODA |
Side discharge overflow adapter, includes drainage adapter and valved stopcock fitting |
TA-050 |
1/2” slip x thread double-gasketed drainage adapter |
TA-075 |
3/4” slip x thread double-gasketed drainage adapter |
TA-100 |
1” slip x thread double-gasketed drainage adapter |
* When paying by Money Order, Purchase Order, Check, . Please add Ground Shipping & handling to cost of products. Credit Card Add 3% to total. Inquire for discount schedule on volume purchases. Since we're a high volume distributor, we're passing the savings to you. Please allow a minimum of 2 weeks lead time to process your order as these planters are made to order. Returns will not be honored unless the product is deemed defective by the manufacturer.
Minimum purchase is $100. NJ
residents Please add required sales tax.
.
These colors are standard across most of the Planters. They are achieved with high quality paint finishes, powder coat finishes, or carefully matched blended pigments, depending on the product. Some products and materials, when marked, will only be available in a limited range of these standard colors.
The following colors have an associated color number. That number corresponds to a standard Pantone® (PMS) color. If you are in doubt how a color will actually appear, refer to a physical Pantone color selector. The varying materials and finishes will have different sheens (think of concrete vs. polyethylene plastic), so the actual colors may vary slightly from the Pantone® standard.
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
Ppolyester-based fiberglass (also known as Fiberglass Reinforced Plastic, or FRP)are used , hand-laid in open molds. For our Flower Framers and FF European Series windowboxes we use pultruded fiberglass. Pultrusion is a process through which glass and resin are drawn through a shaping tool.
Fiberglass is a lightweight, strong material made up of layers of polyester resin alternated with woven fiberglass mat. The strength and durability of fiberglass depend upon the number of layers of resin and mat, and the weight of the mat. Because we design our fiberglass to withstand being outdoors, Tournesol typically uses the heaviest mat available and applies at least one layer more than most other fiberglass manufacturers. The number of layers, the thickness of the material, and the internal structure (bulkheads, gussets, etc.) depend upon the configuration and natural strength of the product design.
Although fiberglass can be finished in a number of ways, Tournesol uses one process for standard colors, and a completely different one for metallic finishes. The standard colors are typically painted with industrial-grade acrylic enamel finishes on prepared blanks. This results in a consistent, durable finish that can be easily repaired in the field. The metallic finishes are created by infusing clear resin with atomized metals, applying it to the fiberglass, then hand-finishing the surface to get the desired finish. The metals in the resin respond to natural conditions the same way the solid metal would. Each pot will weather differently, which allows for a dramatic richness that simply can’t be reproduced through other processes.
All fiberglass products (with the exception of the Flower Framer and FF European Series boxes) are waterproofed with an additional layer of black gelcoat resin before shipping.
For standard colors refer to the above.
The metallic finishes shown below vary depending upon the texture of the fiberglass material on which they are applied. Metallic finishes are applied to the surface of the fiberglass, and may be repaired if scratched.
FRP IN METALLIC FINISH
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
T-0 |
T-1 |
T-2 |
Collection |
T-0 |
T-1 |
T-2 |
| Arcade | ● |
● |
● |
| Basix Collection - LLDPE Planter | - |
- |
- |
| Craftsman Collection - Hammered Finish | - |
- |
- |
| Downtown | ● |
● |
● |
| Empire Collection - Smooth with decorative frieze | ● |
- |
- |
| Metro | ● |
- |
- |
| Plaza | ● |
● |
● |
| Urban | ● |
● |
● |
| Village | ● |
- |
- |
| Wilshire | ● |
● |
● |
Fiberglass is exceptionally strong and rigid, based upon the strength of the glass fibers, and the wetting characteristics of the resin surrounding them. It can be made very thin (most pot walls are approx. 5/32” thick), yet still maintain their shape.
| Hardness, B | 50 | |
| Tensile Strength, Ultimate | 12500 psi | |
| Elongation at break | 1.3% | |
| Modulus of Elasticity | 1020 ksi | |
| Flexural Modulus | 754 ksi | |
| Flexural Yield Strength | 27600 psi | |
| Compressive Yield Strength | 21800 psi | |
| Glass content, average | 35% |
Fiberglass are used in the following products:
Village Collection, Metro Collection, Urban Collection, Craftsman Collection, Empire Collection, Wilshire Boxes, Wilshire 2 Boxes, Flower Framer, FF European Series, Coronado Boxes, CB Autofill windowboxes, fiberglass saucers, and some custom fabrications.
LLDPE is a highly versatile plastic material known for its chemical and tear resistance. Tournesol Siteworks uses LLDPE in our rotationally-molded products. It can be recycled, and many of our black irrigation products are made of 60% post-industrial recycled material. LLDPE is non-polar which gives it great chemical resistance, but also prevents paint from adhering to the surface unless specially treated. For this reason all decorative products are made of virgin material and integrally colored with pigments. Our complex matrix finishes are achieved via a blend of up to 5 pre-compounded colors. Typically LLDPE products will not take paint well in the field. This also lends the material a degree of graffiti-resistance. Polyethylene typically exhibits very good environmental resistance, especially when treated with a UV inhibitor.
Most irrigation products are molded in black. Decorative rotational molded products are available in all the colors on the “standard” tab. White will tend to be slightly translucent, and may yellow over time. AFPM & AFHB products are available in a limited range of colors.
The matrix finishes shown below are typically used with the SeaCrest Series and Basix Collection planters. . Matrix finishes are integral to the material, so are especially good at hiding scratches, nicks, and fading.
MATRIX |
FINISH |
|||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
LLDPE is not particularly rigid, but can be molded in heavier wall sections to provide strength to a product. It is very tear-resistant, and holds up well to impact.
| Hardness, R | 52 | |
| Tensile Strength, Ultimate | 2300 psi | |
| Elongation at break | 400% | |
| Flexural Modulus | 84 ksi |
LLDPE are used in the following products:
SeaCrest Series, Basix Collection planters, CWI Interior, CWI Exterior, CWI Classic (CWC), CWF Flower Bowl, CWM Modular, AutoFill Container Irrigation Systems, AFIR, AFPM, AFHB Hanging Basket products, garbage can liners, and some custom products.
HDPE exhibits the same good environmental resistance as LLDPE, but has better mechanical properties. This allows us to thermoform it for use in our modular green roof tray product. It can be have relatively thin wall sections yet still exhibit good rigidity and the tear resistance.
Currently this material is only manufactured in black.
| Hardness, R | 66 | |
| Tensile Strength, Ultimate | 4200 psi | |
| Elongation at break | 710% | |
| Flexural Modulus | 150 ksi | |
| Flexural Yield Strength | 3750 psi |
HDPE are used on modular green roof trays.
Polypropylene (PP) is a plastic material with average properties. Like polyethylene, it is non-polar, chemical resistant and cannot be painted. It has slightly better mechanical properties than polyethylene, and can be manufactured in thinner wall sections. Tournesol uses it for injection molded container irrigation inserts and leakproof welded planter liners.
Currently this material is only manufactured in black.
Polypropylene has average mechanical characteristics, and is able to be used in a wide variety of products. Using heavier wall thicknesses with our leakproof liners allows for better rigidity.
| Hardness, R | 60 | |
| Tensile Strength, Ultimate | 4900 psi | |
| Elongation at break | 120% | |
| Flexural Modulus | 125 ksi | |
| Flexural Yield Strength | 4850 psi | |
| Compressive Yield Strength | 6820 psi |
PP are used for: CWI Interior, CWI Exterior container irrigation systems, Leakproof welded liners, some various smaller plastic parts.
HIPS is polystyrene with rubber added to add impact resistance to its excellent rigidity. We thermoform a post-industrial 60% recycled material to create our planter liners. It doesn’t hold up well to UV, so we recommend painting areas that will show when using our liners in an exterior application.
HIPS is normally black, but can be painted any of Tournesol the colors on the “standard” tab.
| Hardness, R | 95 | |
| Tensile Strength, Ultimate | 3500 psi | |
| Flexural Modulus | 277 ksi | |
| Flexural Yield Strength | 6900 psi |
HIPS are used for: Natural Spring planters, CWS Planter Liners, Thermoplastic Planter Liners, some parts of Coronado and CB AutoFill windowboxes.
GFRC has the look and durability of concrete, without suffering the associated weight. By adding long strand glass fibers and woven mat to fiberglass, we are able to increase the strength of the material and decrease the thickness. Decreasing the thickness 60% (from typically 3” in cast concrete to 1” in GFRC) directly reduces the weight by the same amount.
Two different finishes are offered in GFRC – travertine and acid etched. The travertine finish has a rustic, puckered appearance. The acid etch has a consistent, fine sand texture. From one base material color, the two finish colors will vary because of the sand and aggregate exposed. All colors are integral to the material, so will effectively hide chipping and scratching.
GFRC Concrete is available in two finishes - Acid Etched (a light sandblast look), and Travertine (a natural, pitted smooth surface).
ACID-ETCH FINISH GFRC
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
TRAVERTINE FINISH GFRC
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
GFRC is a lightweight version of concrete, made up of Portland cement, sand and aggregates, water, alkali-resistant glass fibers and certain additives. The glass fibers provide the same function in concrete that rebar does. It makes the concrete wall significantly stronger than typical precast, so it allows a thinner wall section. The concrete doesn’t weigh less than normal concrete, we can just use less of it. The length of the glass fiber strand is critical in maintaining the strength of the material.
| Tensile Strength, Ultimate | 725 to 1000 psi | |
| Flexural Modulus | 250 to 350 ksi | |
| Flexural Yield Strength | 1000 to 1600 psi |
GFRC are used in the following products: Village Collection, Metro Collection, Urban Collection, and Craftsman Collection planters.
Click Installation Manual.

Transport: Inspect the planter upon delivery from carrier and note any damage at that time. When transporting empty planters on site carry the planter between two or more people, on 2 or 4 wheel dollies, or move on a pallet. Do not roll the planter on its base rim unless the stopcock drain assembly has been removed from the bottom of the planter.
Soil Mix: Start with evenly moist, good quality professional potting soil. We recommend that it be a "soilless" media composed of approximately :
Do not use field soil in these planters. A slow-release fertilizer may be added to the soil mix before planting if desired; however, add at only one quarter of the recommended amount. Before planting, make sure that the soil surrounding the plant's root ball is evenly moist. It is important that the plants are not excessively dry or excessively wet when planting.
Situate the Planter: Move the planter to its final location, remembering to rotate it so that the fill hole and drain stopcock will be accessible both during planting and when the plants have grown. Protect all surfaces near the planter which may be damaged by soil mix, plant container, tools etc. Draping the planter rim and outside walls with a tarp will reduce the clean up effort. Tape the sensor to the outside wall of the planter during planting to avoid hitting any part of the sensor with tools.
Tree Tie-Downs: The SS-5536 and SS-3830 planters come equipped with anchor points for tree tie-down cables. If tie-downs are to be used, then unscrew the protective bolts and replace with the eye bolts that are included with the tie-down package. Remember to attach the tie-downs during the planting process to avoid having to search for the eyebolts later. The three anchor points are located below finished soil level to be as unobtrusive as possible.
Getting the Plant and the Soil in Place
Fill the reservoir with water only after checking that the planter and the plant are positioned correctly. Be careful to remove any stray soil mix from around the filler area to prevent soil from getting into the reservoir. Remove the filler stopper, insert a hose and half fill the reservoir with water. Replace the stopper, inserting it firmly and with a twist to ensure that a tight seal is made.
Leave the planter alone to allow the CWS to set up its own watering cycle. Do not frequently pull the stopper to check the reservoir. This interrupts the natural watering cycle and can cause overwatering.
After the initial two or three days, return to check the planter is watering correctly. When the system is functioning, the soil surface should be dry or drying out down to the sensor depth. If the topsoil is still moist, don't pull the stopper. If the soil is dry, a vacuum should be produced in the reservoir- pull the stopper while listening carefully for the sound of air being pulled into the reservoir (it makes a "whooshing" or a "popping" sound).
If the soil surface is wet, no air movement is felt or heard when removing the stopper then consult the section "Trouble Shooting Instructions". If the soil surface is drying out and the air movement can be heard or felt, then the planter has been planted up correctly and is now establishing its own watering cycle. At this point the reservoir may be filled all the way to the top, and the stopper firmly replaced as before.
Underplanting Shallow-Rooted Plants with Larger Plants/Trees
Completely install the larger plant, activate and place the sensor, and fill the reservoir as outlined in the instructions above. Make a note of the depth of the sensor. Excavate spaces for underplantings in container 1" deeper than the underplanting rootballs.
Topwater underplantings regularly to provide the shallower plants with a water source until they have the chance to grow down to the level of the moisture sensor, typically 3-4 weeks. Carefully top water the plants with no more than two cups of water per plant initially, until the plants have had a chance to grow down to the moisture level.
Water Filling Schedule
Check the reservoir no more than absolutely necessary to determine how much water the plant is using. After 6-8 weeks the plant will have acclimated, and you can estimate typical water usage and be able to work out a filling schedule to minimize maintenance visits. Remember, as seasons change, the filling schedule will also change. Similar or different plants in different locations will demand water at differing rates. Always allow for at least a week's supply of water in the reservoir in case of unusually hot or windy weather. Do not allow the reservoir to run dry between fillings.
Adjust your site visits according to the needs of your thirstiest plants. Top off the reservoirs of all planters at once to be sure that some don't go dry. Take advantage of the Controlled Watering System to streamline your maintenance visits.
Fertilizing
Once the plantings have become established in the planter, or anytime after that, fertilizer may be used. Planter Technology recommends using HM-10 time-release fertilizer for sub-irrigation systems. Add 3 tablespoons of fertilizer every 3-4 months. When using other fertilizer,add water soluble fertilizer directly with the water when filling the reservoir. Use fertilizers at 1/4 recommended strength. Adding fertilizer to the reservoir at full strength may cause severe root and leaf burn. Apply fertilizer in this way three or four times a year at times most beneficial to plant growth.
NOTE: Never use organic type fertilizers. These are not water soluble and also encourage the rapid growth of algae which could reduce the efficient delivery of water into the planter.
Stopcock Drain Assembly
When in normal use, the drain stopcock valve may be left in the closed position. In normal conditions, the planter requires no drainage. If left open, the stopcock will not block any water that may condense in the tube from time to time depending on the weather conditions, which may lead to weepage and staining the surface the planter is on. After exposure to heavy rain or if the planter has been top watered by mistake, the stopcock should be opened to allow excess water to drain away. Proper drainage after rains is critical to the health of the plant. The stopcock is threaded to accommodate a standard hose fitting. By attaching a hose and then opening the stopcock, it is possible to carry the drain water away without wetting the ground around the planter. (When draining the planter in this way make sure that the opposite end of the hose is at a lower level than the drain stopcock.)
The siphon tube is provided as an emergency drain to remove accumulated water from inside the planter. Simply open the top of the tube, and siphon the standing water out.This may need to be repeated several times to get all the water out of the planter.
Using the Tamper Resistant Stopper (TSP-6888, Optional)
Tamper resistant stoppers are used to prevent removal in heavy-traffic locations. The metal topped stopper is opened with a standard hex wrench. To close, hold the stopper firmly in the hole, insert the hex key in the screw top, and turn the hex key clockwise several times until resistance is met. To open, insert hex key and turn counterclockwise 3-4 times. Be sure not to overturn key!
Trouble Shooting the Controlled Watering System Irrigation
The water flows into the container through a number of inlets - check for signs that the soil is being evenly moistened in all areas of the planter.
Long-term Preventative Maintenance for the Controlled Watering System
Like any system., the CWS may require maintenance over time. The sensor tubes, stoppers, inlet disks, and soil separator fabric may need to be changed to keep the CWS functioning as designed. The maintenance required depends upon the careful use of the planter.
RECOMMENDATION:
fill the reservoir with clean water, keeping dirt and other debris out. Over time, algae growth due to dirty water or soil in the container can lead to blockage of the inlet disks at the base of the planter.
Don't allow the reservoir to go dry - this may lead to mineral build up in the water inlet discs, preventing full water flow.
Use Biobarrier squares for plants with aggressive root systems - A plant's roots will naturally seek out a water source. Over time particularly aggressive root systems may go through or around a single layer of fabric, clogging the inlet disk from the container side (preventing water flow). Biobarrier fabric is chemically treated to prevent roots from going into the reservoir.
Should you find that the water level in the reservoir is not dropping, the soil is dry at lower levels and the plant looks like it isn't getting the water it needs, then there may not be enough water making it through the inlet disks. Drain much of the water out of the planter, lower a hose towards the bottom of the planter, and flush the inside with high-pressure water. This may serve to disrupt any debris or blockage on the underside of the disk. If that doesn't solve the problem, add a mineral dissolving agent into the water (such as a decalcifier, etc.), to dissolve minerals that may have built up in the disk, clogging the micropores.
If these solutions don't clear the discs, dig out the plant to prune the roots back. At the same time, replace the inlet disks with new ones and use Biobarriers to ensure that build-up doesn't become a problem.
Keeping the SeaCrest Series Planter Looking Great: